Advertisement
Advertisement
DOMOTEX 2020, 10 - 13 January
Homepage>Exhibitors & Products >Playwood Rubber Wood 22

Playwood Rubber Wood 22

Elastic sporting floor model

Logo Dalla Riva

Exhibitor

Dalla Riva

Exhibitor details
Exhibitor details
Logo Playwood Rubber Wood 22

Product description

The existing screed must be full planed with a tolerance of + - mm 2,00 measured at a distance of mm 2000.

Your own supply of a water-proof layer created by laying a 0.15mm thick polyethylene sheet with joints overlapped by 30 cm and turned edges.

SUPPLY of a 15mm thick elastic mat, installed by laying the modules in the direction of the wooden floor. This solution allows clearing air voids under the floor, thus ensuring total thermal and acoustic insulation.

SUPPLY of floor splitter, consisting of 12 mm thick spruce playwood. Panels simply rest on the mat, perpendicular to the floor line, adequately combined and stapled in order to create a monolithic slab that can ensure all performance and protective properties of the floor. Such values must be confirmed by the evaluation certifying that the floor meets the minimum requirements set by all the 7 tests according to EN 14904 of June 2006) standards, and copies of official certificates issued by specific accredited bodies specialized in sports floors testing shall be submitted at the time of supply, including 1st level F.I.B.A. (International Basketball Federation).

SUPPLY of Hevea rubber hardwood sport flooring in prefinished, water-proof planks, a standard choice for gyms - no less than 22 mm thick - 130 mm wide 1830 mm long; planks are nailed to the substructure with nails of suitable length. During installation, the planks are already provided with slots in order to allow for the natural expansion of hardwood; they come in boards suitable for sport use and, therefore, no less than 22mm thick, in rubber hardwood (multilayer type boards are excluded) with joints formed by tongues and grooves (male and female having minimum cross-section of 6x6mm) on both sides and heads, to allow a perfect installation.
Planks are hot pre-painted with 6 layers of two-component polyurethane paint, so as to ensure a coating film of at least 45 micron and a surface roughness of 0,5 micron.

Hall 13, Stand E76

Stored items

0

Advertisement
Server communication error: Item could not be saved.