DOMOTEX 2019, 11 - 14 January
TO TAKE UP AND WIND UP SINGLE OR MULTIPLE YARN ENDS
The winder was designed to take up single or multiple yarn ends. It is used on warp knitting machines, Raschel machines, weaving machines and others. The necessary motor torque can be adjusted precisely according to the number and count of the yarn ends. The take-up speed will set itself to the let-off speed of the yarn using the pre-set torque force. The Maximum revolution speed is restricted to 240 Rpm. If this revolution speed is exceeded, the motor will be switched off. Upon reducing the speed, the set tractive power at the motor will be switched on again. The yarn can be removed from the take-up by unscrewing the front flange and taking the yarn off the conical core. The winder must not be turned off when the production machine is temporarily stopped-for repairing a defect etc. Only if the machine is stopped for a longer period of time, for instance over night, the winder should be switched off. An indicator lamp shows whether the unit is on or off.
KNITTED FABRIC INSPECTOR WITH OPTO-ELECTRONIC FAULT DETECTION
The new knitted fabric surveillance device SCANNER 5390 impresses through its high quality and outstanding ...
Laser Thread Control System
CONTACT FREE AND CONTINUOUS THREAD BREAK AND CAPILLARY SURVEILLANCE FOR WEAVING MACHINES
By using the LASERSTOP 4080/4082 laser ...
AUTOMATIC OPTICAL INSPECTION SYSTEM FOR TEXTILE MACHINES
0 % Rejects
100 % Quality
Optical Online Fabric Control
- Warp Knitting Machines
- Weaving Machines
DIGITAL NEEDLE SURVEILLANCE WITH NEEDLE POSITION DISPLAY
for immediate stoppage of single, fine rip, jacquard and interlock circular knitting machines in case ...
TWIN CHANNEL YARN INSPECTOR - IMMEDIATE STOPPAGE OF WARPING MACHINES WHEN YARN FAULTS OCCUR
The PROTECHNA yarn inspector DUO-WARPSTOP Type 3020 is used to detect ...
Digital Thread Counter CAMSCAN II Type 5201 with Thread Position Display
TO IMMEDIATELY STOP WARPING, SIZING OR BEAMING MACHINES IN THE EVENT OF THREAD BREAKS ...
AUTOMATIC OPTICAL INSPECTION SYSTEM FOR THE THREAD TENSION
The new surveillance device TENSOSCAN 5371 automatically controls the thread tension of all the individual ...
THREAD BREAK DETECTOR FOR ELASTOMERIC EQUIPMENT
A safe and fast detection of thread breaks in the warp sheet helps to reduce losses. The newly developed PROTECHNA ...
OPTO-ELECTRONIC YARN INSPECTOR FOR MONITORING THE YARN QUALITY DURING WARPING AND BEAMING AT MULTIPLE LEVELS
The yarn inspector CoGaStop Creel is a control system ...
AUTOMATIC OPTICAL INSPECTION SYSTEM FOR TUFTING MACHINES
You are here: >>> English >>> TUFTING MACHINES >>> TUFTCAM
AUTOMATIC OPTICAL ...