DOMOTEX 2019, 11 - 14 January
Digital Thread Counter CAMSCAN II Type 5201 with Thread Position Display
TO IMMEDIATELY STOP WARPING, SIZING OR BEAMING MACHINES IN THE EVENT OF THREAD BREAKS OR AN INCORRECT NUMBER OF THREADS
The detection of broken threads can be a problem whenever high running speeds on textile machines are encountered. The further development of the well known digital thread counter CAMSCAN for warping, beaming, sizing, draw warping and similar machinery, prompted us to bring onto the market an improved system, which in addition to the present control of missing threads in the yarn sheet, or the incorrect number of threads, also has the possibility to detect and display the actual position of the missing thread in the warp sheet. Now there is also the possibility to establish the independent positional frequency of thread breaks and with its help, for example, a faulty package which is always causing the defect, can be identified at once and then be exchanged. If the pre-set fault count for one package is exceeded, then the machine can be locked and then, for example, the package be exchanged. The new digital thread counter is called CAMSCAN II and considerably supports avoidance of costly losses caused by the late or never detected faults in the warp sheet.
KNITTED FABRIC INSPECTOR WITH OPTO-ELECTRONIC FAULT DETECTION
The new knitted fabric surveillance device SCANNER 5390 impresses through its high quality and outstanding ...
TO TAKE UP AND WIND UP SINGLE OR MULTIPLE YARN ENDS
The winder was designed to take up single or multiple yarn ends. It is used on warp knitting machines, Raschel ...
Laser Thread Control System
CONTACT FREE AND CONTINUOUS THREAD BREAK AND CAPILLARY SURVEILLANCE FOR WEAVING MACHINES
By using the LASERSTOP 4080/4082 laser ...
AUTOMATIC OPTICAL INSPECTION SYSTEM FOR TEXTILE MACHINES
0 % Rejects
100 % Quality
Optical Online Fabric Control
- Warp Knitting Machines
- Weaving Machines
DIGITAL NEEDLE SURVEILLANCE WITH NEEDLE POSITION DISPLAY
for immediate stoppage of single, fine rip, jacquard and interlock circular knitting machines in case ...
TWIN CHANNEL YARN INSPECTOR - IMMEDIATE STOPPAGE OF WARPING MACHINES WHEN YARN FAULTS OCCUR
The PROTECHNA yarn inspector DUO-WARPSTOP Type 3020 is used to detect ...
AUTOMATIC OPTICAL INSPECTION SYSTEM FOR THE THREAD TENSION
The new surveillance device TENSOSCAN 5371 automatically controls the thread tension of all the individual ...
THREAD BREAK DETECTOR FOR ELASTOMERIC EQUIPMENT
A safe and fast detection of thread breaks in the warp sheet helps to reduce losses. The newly developed PROTECHNA ...
OPTO-ELECTRONIC YARN INSPECTOR FOR MONITORING THE YARN QUALITY DURING WARPING AND BEAMING AT MULTIPLE LEVELS
The yarn inspector CoGaStop Creel is a control system ...
AUTOMATIC OPTICAL INSPECTION SYSTEM FOR TUFTING MACHINES
You are here: >>> English >>> TUFTING MACHINES >>> TUFTCAM
AUTOMATIC OPTICAL ...